Engineered Concepts Inc.

Adapting to larger machines

Every inch of your X travel is precious space, especially when doing intricate parts with many operations. When working with a 1 1/2+ spindle bore machine, one needs not only rigidity, but efficient use of table space. Large OEM holders address the rigidity but use a lot of area, as they are mounted directly to the machine table and must achieve a stretch of 85mm (3.346'') to the spindle center. Our riser adapter systems used with the 3/4'' & 1/2�� center height tooling, provides: 1) More than doubling the quantity of tools, 2) a rigid work platform, 3) And a much broader selection of tooling options. Easy bolt on to  85mm or  55mm, spindle center height machines.

There are several options to choose from. 

1) ROP-8517 (85mm) A one piece design for general use. It covers the entire useable X travel of the machine, utilizing the 1/2�� (with ASP-8517, Shim Plate) or 3/4'' center height tooling.                                                 DAEWOO / DOOSAN: 150G / 160G / 220GTM  KIA: KIT30TM HYUNDAI: HIT-400GTM

2) ROP-8512 (85mm)  A one piece design for use with a sub spindle. It covers 12'' of useable X travel while allowing the sub spindle to operate. Also utilizing the 1/2�� (with ASP-8517, Shim Plate) or 3/4'' center height tooling. DAEWOO / DOOSAN: 150G / 160G / 220GTM  KIA: KIT30TM HYUNDAI: HIT-400GTM

3) RQC-8517 (85mm)  Precise change over set ups in just minutes, from job to job, chip to chip.                     3/4'' center height tooling only.    DAEWOO / DOOSAN: 150G / 160G / 220GTM  KIA: KIT30TM HYUNDAI: HIT-400GTM

 

 

GO TO> TOOLING, HOLDERS, ACCESSORIES